Danfoss ECtemp 550 Guida di Installazione Scaricare il pdf (Pagina 11)

3. Mount and reassemble the thermostat.

= Screw holes for mount and reassemble the ther-

mostat.

▪

Fasten the thermostat to a socket or an exterior wall

box by driving the screws through the holes in each

side of the thermostat.

▪

Install the frame, display module, and front cover in

the reverse order of disassembly.

Make sure to carefully put the display module in

place and do not over-tighten the screws.

4. Turn on the power supply.

Initially main supply the thermostat for 15 hours to fully

charge the battery. The current time and day is then kept

for 100 hours if mains supply is off. All other settings are

stored permanently.

ECtemp 550

Installation Guide 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Nessun commento

Danfoss ECtemp 550 Guida di Installazione Pagina 11