Danfoss SET 3E Manuale Utente Scaricare il pdf (Pagina 9)

Using the programmer

4 - H ON / W ON

This is the ‘CONSTANT’ position and the programmer

will remain permanently ON for both Heating and Hot

Water, irrespective of the position of the tappets.

5 - H TWICE / W ONCE

In this position the heating will come on and go off

according to the times you have programmed (ON at

A, OFF at B, ON at C, OFF at D).

The Hot Water will come on at A and stay on until D.

6 - H OFF / W TWICE

In this position the Heating will be permanently OFF

and the Hot Water will come on and go off according to

the times you have programmed (ON at A, OFF at B,

ON at C, OFF at D).

Note:

If hot water is required all day with the heating shut

off (i.e. heat off, water once)

 Turn the selector switch to ‘H twice / W once’ and

turn down the room thermostat to its lowest

setting.

If constant hot water is required with heating off (i.e.

heat off, water on)

 Turn the selector switch to ‘ H on / W on’ and turn

the room thermostat to its lowest setting.

1 2 3 4 5 6 7 8 9 10 11 12

Nessun commento

Danfoss SET 3E Manuale Utente Pagina 9