Danfoss TripleLynx CN Manuale Utente Scaricare il pdf (Pagina 22)

5. Maintenance

5.1. Maintenance

Normally, the inverter needs no maintenance or calibration.

Ensure the heatsink at the rear of the inverter is not covered.

Clean the contacts of the PV load switch once per year. Perform cleaning by cycling the switch

to on and off positions ten times.The PV load switch is located at the base of the inverter.

5.1.1. Cleaning the Cabinet

Clean the inverter cabinet using pressurised air, a soft cloth or a brush.

5.1.2. Cleaning the Heatsink

Clean the heatsink using pressurised air, a soft cloth or a brush.

For correct operation and long service life, ensure free air circulation

- around the heatsink at the rear of the inverter

- to the fan at the inverter base

Do not touch the heatsink during operation.

Temperature can exceed 70 °C.

Note:

Do not cover the inverter.

Do not use a water hose, aggressive chemicals, cleaning solvents or strong detergents to

clean the inverter.

5. Maintenance

L00410581-01_02 21

1 2 ... 17 18 19 20 21 22 23

Nessun commento

Danfoss TripleLynx CN Manuale Utente Pagina 22